تامین کننده انواع لوازم اندازه گیری و آزمایشگاه لوله و پروفیل های پلاستیکی
PVC Door and Window Testing Machine
1. CWWS Series Door and Window Physical Property Tester
2. CJS-2124 Series Door and Window Mechanical Property Tester
3. XYJ Series Angle Strength Testing Machine
4. XJL Dropping Hammer Impact Testing Machine
5. XWK-25 Low Temperature Cooling Chamber
6. LDY Insulating Glass Dew Point Tester
CWWS Series Door and Window Physical Property Tester
CW series door and window physical property tester is the latest computer control door and window testing equipment and conforms to GB/T 7106-2002. This series machines are applicable for the physical property test of building outer windows, such as wind pressure resistance ability, air tightness and water tightness. It is ideal testing instrument for project quality testing section, product quality testing section, university and college and research institution.
CWWS-2324 Computer Double Display and Double Control Type
CWWS-3030 Computer Double Display and Double Control Type
The fan of this machine adopts variable frequency control. And the monitoring system uses embedded Monitor, uses the unique control algorithm and enables it to be more accurate, stable and reliable. Solenoid valve controls spray, operates conveniently. Improved pilot clamping bodies can save more time and effort.
CWWS Computer control type: Digital tube displays the pressure of wind and the air flow; LCD displays the deformation and deflection. Only to press a button to accomplish detection steps, it can operate in order at the standard steps then finish the whole test. Monitor automatically calculates the deflection and the value of P1, P2, P3, and the preserve for view, and will not lose the data when power off. The judgment of results completes artificially. It communicates by Ethernet The software can automatically finish test by “one key type”, evaluate testing results and print the reports. It can complete the by semi-automatically control when testing machine is offline, which is real double-control and double-display.
Span of flux:0～520m3/h Precision levels:1.5;
Range of controlling pressure:±10Pa～±150Pa; Accuracy:＜±1Pa;
Resolution of pressure:0.1Pa;
3. Properties of wind pressure test:
Range of regulation:-5000Pa～+5000Pa;Accuracy of sensor:0.2％;
Range of controlling pressure:±100Pa～±5000Pa Precision:＜±2％;
Resolution of displacement:0.01mm;Resolution of pressure:1Pa;
4. Fluctuating period of compression:3s-5s;
Fluctuating time of each grape:5min;
5. Control mode: Computer control full automation and programmed control semi automation;
6. Power supply:380V±10％, 50Hz
CJS-2124 Series Door and Window Mechanical Property Tester
XYJ Series Angle Strength Testing Machine
It is mainly applied in the detection of PVC door and window profile welding test.
2. Product catalogue
XYJ-20B conforming to GB/T 8814-2004 “unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windows”
3. Product features
1. This series machine adopts mechanical-electrical integration structure, which is mainly composed of host machine and electric cabinet.
2. Single chip data acquisition system and high precision load sensor can realize electronic measurement, digital display, which assure the accuracy of the test data and stable performances.
3. Auto-print and save the records.
4. XYJ-20B adopts the unique automatic pulley mechanism. It can avoid the friction force between old specimen and cushion .It makes the test means more technical and accurate.
XJL Dropping Hammer Impact Testing Machine
XWK-25 Low Temperature Cooling Chamber
This instrument is a corollary equipment for our XJL-15 Dropping Hammer Impact Testing Machine. It is used for cooling down the PVC plastic specimen’s temperature to -10℃±1℃, then doing impact test on dropping hammer impact testing machine.
EN12608, 2002 Unplasticized polyvinyl chloride (PVC-U) profiles for the fabrication of windows and doors- classification, requirements and test method.
3.1 XWK-25 Digital Temperature Control Meter
3.1.1 Display type: digital display
3.1.2 Temperature set: manual set, key operation
3.1.3 Display value error: ±0.5%±1
3.1.4 Set value error: ±0.1℃±1
3.1.5 Display resolution: 0.1℃
3.1.6 Temperature set range: -25～+20℃
3.1.7 Control mode: memory three position type
3.1.8 Relay electric shock capacity: 15A/220V
3.1.9 Outer dimension: 160×80×180mm
3.1.10 Working environment: 0-38℃ , humidity <85% RH.
3.2 Cooling chamber
3.2.1 Climate type: SN. N. ST
3.2.2 Total effective volume: 72 L
3.2.3 Rated voltage: 220V, 50Hz, 100W
3.2.4 Cooling ability: 10kg/24hour
3.2.5 Cooling agent and input volume: R12/ 195g
3.2.6 Power consumption: 0.55Kw. h/ 24h
3.2.7 Weight: 37kg
3.2.8 Outer dimension: 600×500×850mm
LDY Insulating Glass Dew Point Tester
It is designed by GB/T11944-2002. It adopts high-power semiconductor refrigeration components, which make the cool copper probe to be under -40 centigrade. It is mainly used to test the drew-point in building insulating glass. The machine size is small. It’s weight is light, no noise and easy to operate.